泰州SKF轴承61926-Z润滑与波纹度的掌控

在双向推力球轴承的维护中，过多的润滑脂实际上有很多危害。泰州SKF轴承润滑脂具有良好的粘附性、耐磨性、耐温性、抗锈性和润滑性，可提高高温抗*氧化性、延缓老化、溶解碳沉积、防止金属屑和油污染结块，提高耐磨损性和耐磨性。嗯。抗药性机械耐蚀性和耐腐蚀性。

In the maintenance of two-way thrust ball bearings, too much grease actually has many haza***. Taizhou SKF bearing grease has good adhesion, wear resistance, temperature resistance, rust resistance and lubricity. It can improve high temperature oxidation resistance, delay aging, dissolve carbon deposition, prevent metal chips and oil pollution caking, and improve wear resistance and wear resistance. Well. Resistant to mechanical corrosion and corrosion resistance.

如果加入更多的润滑脂，扭矩就越大。对于相同的填充量，密封轴承的摩擦力矩大于开式轴承的摩擦力矩。当润滑脂的量等于轴承内部空间体积的60个百分点时，摩擦力矩不会显著增加。这是因为开*放轴承中的大部分油脂已经被挤压，密封轴承中的润滑脂已经丢失。双向推力球轴承的温升随填充温度的增加呈线性增加。在相同充液条件下，轴承的温升高于开式轴承。一般来说，密封滚动泰州SKF轴承的润滑脂填充能力不应超过内部空间的50个百分点。Shawki和MoHTAR试验表明，双向推力球轴承的轴承**适合轴承20~30个百分点。

If more grease is added, the greater the torque will be. For the same amount of filling, the friction torque of the sealed bearing is greater than the friction torque of the open bearing. When the amount of grease is equal to 60 percent of the volume of the internal space of the bearing, the friction moment will not increase significantly. This is because most of the grease in the open and open bearings has been extruded and the grease in the sealed bearings has been lost. The temperature rise of two-way thrust ball bearings increases linearly with the increase of filling temperature. Under the same liquid filling condition, the temperature rise of the bearing is higher than that of the open bearing. Generally speaking, the grease filling capacity of sealed rolling Taizhou SKF bearings should not exceed 50 percent of the internal space. Shawki and MoHTAR tests show that the bearings of the two way thrust ball bearings are suitable for bearing 20~30 percentage points.

1，为了控制波纹度，必*须减小振动的外观。在轴承加工中，可以通过减小轴承表面的形状精度或表面质量来控制振动。此外，加工轴承的机床还必*须具有优异的抗振动性。一般来说，由于轴承的磨削过程是在高速运转的条件下进行的，机床良好的抗振性能对提高磨削速度有很大的影响。

1, in order to control the w***iness, it is necessary to reduce the appearance of vibration. In bearing machining, vibration can be controlled by reducing the shape accuracy or surface quality of the bearing surface. In addition, machine tools for machining bearings must h***e excellent vibration resistance. Generally speaking, because the grinding process of bearings is carried out under the condition of high-speed operation, the good anti-vibration performance of machine tools has a great impact on improving the grinding speed.

2。在泰州SKF轴承的磨削过程中，应进行减速。所谓“减”是指轴承的磨削误差的减小，反映轴承的外径和端面。“一减”是指轴承磨削中基准面精度的提高。对于前者，这是因为沟槽磨削时外径的误差反射和沟槽磨削时的误差反射直接影响到沟槽磨削时外径的误差反射。这种情况的发生，特别是当误差较大时，将不可避免地导致轴承振动的发生和纹波的增加。对于后者，采用这一措施对轴承加工的平稳性起着重要的作用。

2. In the grinding process of SKF bearing in Taizhou, deceleration should be carried out. The so-called "reduction" refers to the reduction of the grinding error of the bearing, which reflects the outer diameter and the end face of the bearing. "One minus" refers to the improvement of base level accuracy in bearing grinding. For the former, this is because the error reflection of groove grinding outer diameter and groove grinding error reflection directly affect the error reflection of groove grinding outer diameter. The occurrence of this situation, especially when the error is large, will inevitably lead to the occurrence of bearing vibration and the increase of ripple. For the latter, the adoption of this measure plays an important role in the ***oothness of bearing machining.

减少轴承磨削过程中的纹波可以提高轴承产品的性能，避免钢球、环等零件的振动或噪声。

Reducing the ripple during bearing grinding can improve the performance of bearing products and ***oid vibration or noise of steel ball, ring and other parts.

在双向推力球泰州SKF轴承的工作中，润滑脂是必不可少的。任何轴承的***都离不开油脂。有人问，你用的油多吗？答案当然是否定的。这是在使用双向推力球轴承润滑脂时应注意的两个问题。

Lubricating grease is indispensable in the work of bidirectional thrust ball SKF bearing in Taizhou. The maintenance of any bearing is inseparable from grease. Some people ask, do you use much oil? The answer is, of course, No. This is the two problem that should be paid attention to when using two way thrust ball bearing grease.

轴承的质量随着制造商的技术水平而变化。当低质量轴承与其它部件结合时，在运行过程中会产生振动和噪声。主要原因是磨削过程中的波纹不严格控制。

The quality of bearings varies with the technical level of the manufacturer. When low quality bearings are combined with other components, vibration and noise will occur during operation. The main reason is that the corrugation in grinding process is not strictly controlled.

文章来自：泰州SKF轴承 www.wh-skf.com

The article is from: Taizhou SKF bearing www.wh-skf.com

文章来自：泰州INA轴承 www.ina-china.cn

The article is from: Taizhou INA bearing www.ina-china.cn

文章来自：泰州NSK轴承 www.klbbearings.com

The article is from: Taizhou NSK bearing www.klbbearings.com

***：524085168

电话：0510-81207777

手机：13311666672/13395185757