润滑中的泰州INA轴承NK68/25检修与清洗的上佳判断

在大多数情况下，可以通过检查受损轴的泰州INA轴承来发现可能的原因。一般而言，单向轴承损坏的三分之一是由疲劳损伤引起的，三分之一是由于润滑**良，三分之一是由于轴承或设备上的污染物的不当处理。

In most cases, the probable cause can be found by examining the Taizhou bearing of damaged shaft INA. Generally speaking, one third of unidirectional bearing damage is caused by fatigue damage, one third is due to good lubrication, and one third is due to improper treatment of pollutants on bearings or equipment.

然而，这些损害模式也与工业类别有关。例如，纸浆和造纸工业主要是由于润滑**良或轴承损坏造成的污染，而不是材料疲劳。

However, these damage patterns are also related to industrial categories. For example, the pulp and paper industry is mainly due to pollution caused by good lubrication or bearing damage, rather than material fatigue.

所谓轴承烧坏状态是指滚道、滚动元件和泰州INA轴承保持架在旋转过程中急剧加热直至变色、**、沉积和损坏。

The so-called bearing burnout state refers to the raceway, rolling elements and Taizhou INA bearing cage heated sharply until discoloration, deposition and damage during rotation.

看到这一点，我想每个人都想知道解决办法。首先要研究润滑油和润滑方法，选择进口轴承润滑油及其用量，选择合适的轴承。研究匹配、轴承间隙和预压，并改进密封装置。检查轴箱和轴承箱的精度。当然，如果你身边有***，让他从你身上学到**好的东西。

1。轴承维护：为了尽可能长时间地保持泰州INA轴承的原始性能，**须进行维护和事故预防，以确保运行的可靠性，提高生产率和经济性。

1. Bearing Maintenance: In order to maintain the original performance of Taizhou INA bearing for as long as possible, ** maintenance and accident prevention must be carried out to ensure the reliability of operation and improve productivity and economy.

保持相应的机械操作条件的**佳操作标准并定期执行。内容包括监测操作状态、补充或更换润滑剂、定期拆卸和检查。运行维护项目包括旋转声、振动、温度、单向轴承润滑状态等。

Maintain appropriate operating standa*** for mechanical operation conditi*** and perform them regularly. The contents include monitoring operation status, replenishment or replacement of lubricants, regular disassembly and inspection. Operation and maintenance items include rotary sound, vibration, temperature, lubrication status of unidirectional bearing, etc.

2。轴承维护：轴承清洗：拆卸轴承时，先记录轴承的外观，确认润滑油残留，取样后对轴承进行检查清洗。***和煤油通常用作洗涤剂。

2. Bearing maintenance: bearing cleaning: when disassembling the bearing, first record the appearance of the bearing, confirm the residual lubricant, and then check and clean the bearing after sampling. Gasoline and kerosene are commonly used as detergents.

拆卸轴承清洗、粗清洗和精清洗，分别在容器中，首先放置在金属网的底部，使轴承不直接接触容器中的污垢。在粗清洗过程中，如果泰州INA轴承因污垢而旋转，则会损坏轴承的滚动表面。在***清洗中，用刷子清*除油脂和胶粘剂。清洗后，转为精洗。

Remove bearing cleaning, rough cleaning and fine cleaning, respectively, in the container, first placed at the bottom of the metal mesh, so that the bearing does not directly contact the dirt in the container. In rough cleaning process, if Taizhou INA bearing rotates due to dirt, it will damage the rolling surface of the bearing. In crude oil cleaning, use grease to remove grease and adhesives. After cleaning, turn to fine wash.

精细清洗是在清洗油时逐一清洗进口轴承。此外，清洁油也应保持清洁。

Fine cleaning is to clean the imported bearings one by one while cleaning the oil. In addition, clean oil should also be kept clean.

3。轴承的维护与判断：为了判断拆卸后的轴承是否可以使用，清洗后检查进口轴承。检查滚道表面、滚动面和配合面的状态，保持架磨损，单向轴承间隙增大，尺寸精度降低。然后用手把不可分离球泰州INA轴承支承在内圈的水平面上，并转动外圈以确定其平滑度。

3. Maintenance and judgment of bearings: In order to judge whether the bearings after disassembly can be used, check the imported bearings after cleaning. Check the state of raceway surface, rolling surface and mating surface, cage wear, one-way bearing clearance increases, dimension accuracy decreases. Then the inseparable ball Taizhou INA bearing is supported on the horizontal surface of the inner ring by hand, and the outer ring is rotated to determine its ***oothness.

文章来自：泰州SKF轴承 www.wh-skf.com

The article is from: Taizhou SKF bearing www.wh-skf.com

文章来自：泰州INA轴承 www.ina-china.cn

The article is from: Taizhou INA bearing www.ina-china.cn

文章来自：泰州NSK轴承 www.klbbearings.com

The article is from: Taizhou NSK bearing www.klbbearings.com

***：524085168

电话：0510-81207777

手机：13311666672/13395185757