南京SKF轴承创新与研发中光润滑起到的维护作用

在汉堡海事会议上，南京SKF轴承工业公司引进了一种小型润滑油干燥器。

At the Hamburg Maritime Conference, Nanjing SKF bearing industry company introduced a ***all oil dryer.

通过可靠的油水分离，新产品使紧凑型油干燥器能够保持来自尾轴密封油的油质。

Through reliable oil-water separation, the new product enables the compact oil dryer to maintain the oil quality from the tail shaft seal oil.

即使安装了油或水封，液体仍然需要润滑艉衬套的密封环。这是如何将少量的水与润滑油混合，使润滑油劣化成乙醇和酸，并损坏密封环。这样可以可靠地防止在尾轴密封中频繁出现油/水混合物，而不需要在气室中进行油润滑。

Even if the oil or water seal is installed, the liquid still needs to lubricate the sealing ring of the stern bushing. This is how a ***all amount of water is mixed with the lubricating oil to deteriorate the lubricating oil into ethanol and acid and to damage the sealing ring. This can reliably prevent the frequent occurrence of oil/water mixtures in the tail shaft seal without the need for oil lubrication in the gas chamber.

工业润滑干燥机配备有泵，这些泵地为密封和相关的罐提供新的润滑剂，污垢，迫使空气通过下面的润滑剂，并加热液体以蒸发气泡。

Industrial lubrication dryers are equipped with pumps that provide new lubricants, dirt, and pressure for air to pass through the lubricants below, and heat the liquid to evaporate bubbles.

紧凑型油干燥器将作为一个完整的南京SKF轴承“即插即用”的解决方案，包括泵，坦克，过滤器和控制单元。

The compact oil dryer will serve as a complete "plug and play" solution for Nanjing SKF bearings, including pumps, tanks, filters and control units.

润滑油如何在轴承的维护中起次要作用？南京SKF轴承维修的关系是什么？

How does lubricating oil play a secondary role in the maintenance of bearings? What is the relati***hip between SKF bearing maintenance in Nanjing?

首先是运动速度：速度越高，容易形成楔形，可选择低粘度、光滑的油膜，保证油膜的存在。当粘度过高时，阻抗将非常大，热量将非常大。当运行缓慢时，根据油的粘度来承载负载，应使用较高粘度的油。

First is the speed of movement: the higher the speed, easy to form a wedge, can choose low viscosity, ***ooth oil film, to ensure the existence of oil film. When the viscosity is too high, the impedance will be very large and the heat will be very large. When running slowly, depending on the viscosity of the oil to carry the load, the higher viscosity oil should be used.

装备平滑任务的“五个定义”和“三个过滤器”是规范和规范日常平滑技术管理任务，保证装备任务顺利进行的无效方法。

The "five definiti***" and "three filters" of equipment ***oothing task are invalid methods to standardize and standardize daily ***oothing technical management tasks and ensure the ***ooth progress of equipment tasks.

人员配备：设置工人的任务，使工人对平稳部分的设备进行加油、加油和清洁分工，各自负责平稳的设备，共同平稳地完成。

Staffing: Set up the task of workers, so that workers on the ***ooth part of the equipment refueling, refueling and cleaning division of labor, each resp***ible for the ***ooth equipment, jointly and ***oothly completed.

南京SKF轴承承载能力：平均载荷越高，润滑剂的粘度越高。低速重载应考虑油的负荷。任务温度：当温差较大时，应选用高粘度指数油。在低温下，应选择粘度高、闪点高、油性好、性好的润滑油及相应的添加剂。当温度不高时，应选用低粘度、低水分、低冰点的高温油。

Nanjing SKF bearing capacity: the higher the ***erage load, the higher the viscosity of lubricants. Low speed he***y load should c***ider the load of oil. Task temperature: when the temperature difference is large, high viscosity index oil should be selected. At low temperature, lubricating oil with high viscosity, high flash point, good oiliness and good properties and corresponding additives should be selected. When the temperature is not high, low viscosity, low moisture and low freezing point high temperature oil should be selected.

定点：确定每个部件的光滑部分和光滑点。油在指***置提供。

Fixed point: determine the ***ooth parts and ***ooth points of each component. Oil is provided at specified location.

质量保证：确定设备的平滑部分的类型、品牌和质量要求。检查油的质量。

Quality assurance: determine the type, brand and quality requirements of the ***ooth part of the equipment. Check the quality of the oil.

定量：确定南京SKF轴承燃油和油量的变化，各部分油量的变化，实施燃油消耗定额管理和定量换油。

QUANTITATIVE: Determine the change of fuel and oil quantity of Nanjing SKF bearing, the change of oil quantity of each part, implement fuel c***umption quota management and quantitative oil change.

电流：确定每个光滑部件的加油、加油和清洗周期。定期对大型储油罐进行采样和测试，确定下一次维护时间和任务内容。

Current: determine the refueling, refueling and cleaning cycles of each ***ooth part. Regular sampling and testing of large oil storage tanks to determine the next maintenance time and task content.

工作环境：蒸汽环境应注意选用防化、防油、防锈油、防尘环境应注意密封。有些气体是腐蚀性的。在这种环境下，应选择耐腐蚀性好的油品。五固定的“三过滤器”应成功完成任务。

Working environment: Steam environment should pay attention to the selection of chemical, oil, rust-proof oil, dust-proof environment should pay attention to sealing. Some gases are corrosive. In this environment, oil products with good corrosion resistance should be selected. Five the fixed "three filters" should complete the task successfully.

文章来自：南京SKF轴承 www.wh-skf.com

文章来自：南京INA轴承 www.ina-china.cn

文章来自：南京NSK轴承 www.klbbearings.com

***：524085168

电话：0510-81207777

手机：13311666672