南京SKF轴承油污聚合物的清理途径

南京SKF轴承研制了一种新型润滑油。在一些应用中，很难接近或要求在运行环境中具有良好的防污性能，因此不能添加润滑剂。这种新型润滑剂在这些特殊情况下是一种理想的选择。西安轴承代理商指出，这种固体润滑剂能够充分填充轴承的内部空间，保护保持架和滚动元件，从而不仅对轴承的运行和工作没有影响，而且大大延长了轴承的使用寿命。

A new type of lubricating oil has been developed in Nanjing SKF bearing. In some applicati***, it is difficult to approach or require good anti-fouling performance in the operating environment, so lubricants can not be added. This new lubricant is an ideal choice under these special circumstances. Xi'an Bearing Agent pointed out that this solid lubricant can fully fill the bearing's internal space, protect the cage and rolling elements, thus not only has no impact on the operation and work of the bearing, but also greatly prolongs the service life of the bearing.

高分子材料的结构非常特殊。南京SKF轴承有许多微孔，是普通润滑剂的4倍。当内表面移动时，油慢慢分散，以确保每个轴承的平衡润滑。

The structure of polymer materials is very special. The SKF bearing of Nanjing has many micropores, 4 times that of ordinary lubricants. When the inner surface moves, the oil is dispersed slowly to ensure balanced lubrication of each bearing.

南京SKF轴承充油聚合物材料被模制到轴承中。在成形过程中，滚子与滚道之间将形成非常窄的间隙，允许轴承部件旋转。贯穿间隙的油从一开始就提供了良好的润滑。与传统结构相比，这种润滑剂可以带来一系列优点。

Nanjing SKF bearing oil filled polymer material is molded into bearings. During the forming process, a very narrow gap will be formed between the roller and the raceway, allowing the bearing parts to rotate. The oil that penetrates the gap provides good lubrication from the beginning. Compared with traditional structure, this lubricant can bring a series of advantages.

特别地，润滑油在轴承表面上的平均分布可以在没有操作温度的情况下保证。

In particular, the ***erage distribution of lubricants on the bearing surface can be guaranteed without operating temperature.

由于频繁使用，油污会降低轴承的使用寿命，那么如何去除南京SKF轴承上的油渍呢？下面的轴承西安代理教你一种方法删除油脂轴承容易。

Because of frequent use, oil stains will reduce the service life of bearings, then how to remove the oil stains on Nanjing SKF bearings? The following bearing Xi'an agent teaches you a way to remove grease bearings easily.

软质干油或防锈膏硬化轴承应浸渍在100～200度的热油中，夹持轴承，刷子轴承浸渍油。软干性油或防锈软膏在加热到100度时融化。从轴承裂缝中洗去是很容易的。有时轴承在油中一次又一次收缩。石油污染也会从裂缝中流出。

Soft dry oil or anti-rust paste hardened bearings should be impregnated in 100 ~ 200 degrees of hot oil, clamped bearing, brush bearing impregnated oil. Soft dry oil or rust preventive ointment melts when heated to 100 degrees. It is easy to wash away from bearing cracks. Sometimes the bearing shrinks again and again in the oil. Oil pollution will also flow out of cracks.

清洗南京SKF轴承向心滚珠轴承时，滚珠、齿条及内圈应从外圈水平旋转，然后浸入热油中。清洗短圆柱滚子轴承时，滚子、齿条、内圈和外环也应分开。

When cleaning the centripetal ball bearing of Nanjing SKF bearing, the ball, rack and inner ring should be rotated horizontally from the outer ring and then immersed in hot oil. When cleaning short cylindrical roller bearings, roller, rack, inner ring and outer ring should also be separated.

当热油被清洗时，油的温度不应超过20度。

When the hot oil is cleaned, the temperature of the oil should not exceed 20 degrees.

文章来自：南京SKF轴承 www.wh-skf.com

The article is from: Nanjing SKF bearing www.wh-skf.com

文章来自：南京INA轴承 www.ina-china.cn

The article is from: Nanjing INA bearing www.ina-china.cn

文章来自：南京NSK轴承 www.klbbearings.com

The article is from: Nanjing NSK bearing www.klbbearings.com

***：524085168

电话：0510-81207777

手机：13311666672