南京SKF轴承圆锥滚子系列下的性能与寿命参数***大化

圆锥滚子南京SKF轴承由内圈、滚子和保持架组成，可承受较大的径向和轴向载荷。介绍了圆锥滚子轴承的安装条件。为了保证轴承的寿命和可靠性，需要根据轴承的位置和速度、倾角、速度和温度来匹配合适的轴承。

Nanjing SKF bearing with tapered roller c***ists of inner ring, roller and cage, which can bear large radial and axial loads. The installation conditi*** of tapered roller bearings are introduced. In order to ensure the life and reliability of the bearing, it is necessary to match the appropriate bearing according to the position and speed, inclination, speed and temperature of the bearing.

1，使用地点。南京SKF轴承是用来生产轴承的。轴承在***轴承行业处于前列地位。标准产品有20000多个轴承。

1, the location of use. Nanjing SKF bearing is used to produce bearings. Bearing is in the forefront of the global bearing industry. The standard product has more than 20000 bearings.

圆锥滚子轴承通常与两组轴承成对使用，因为它们适用于径向和轴向载荷的组合，主要基于径向载荷。这些轴承主要用于汽车锥齿轮、差速器、前后轮毂（形状：气缸）、减速器等汽车传动部件。

Tapered roller bearings are usually used in pairs with two sets of bearings because they are suitable for combination of radial and axial loads, mainly based on radial loads. These bearings are mainly used in automotive bevel gears, differential, front and rear hub (shape: cylinder), reducer and other automotive tran***ission components.

2。许用倾角

2. Permissible inclination

一般来说，圆锥滚子南京SKF轴承不允许轴相对于壳体孔倾斜，如果有倾斜，要小于2’。

Generally speaking, the tapered roller Nanjing SKF bearing does not allow the shaft to tilt relative to the shell hole, if there is a tilt, to be less than 2'.

三。承诺速度。

Three. Commitment speed.

在正确的安装、优良的润滑环境下，确保南京SKF轴承极限转速为0.3-0.5倍（一般0.2倍的极限转速是优先合适的）。丰富的轴承行业经验，具备开发、制造和使用各种***工程产品所需的知识和专长。小型轴承，如微型轴承，只有0.003克，大轴承高达三十四吨。

In the correct installation and excellent lubrication environment, ensure that the limit speed of Nanjing SKF bearing is 0.3-0.5 times (generally 0.2 times the limit speed is preferred appropriate). Rich bearing industry experience, with the development, manufacture and use of various advanced engineering products required knowledge and expertise. ***all bearings, such as miniature bearings, are only 0.003 grams, with large bearings up to thirty-four t***.

4，承诺温度。

4, commitment temperature.

通常，在正常载荷、适当的润滑和润滑下，南京SKF轴承可以在零下30至150摄氏度之间工作（效果：减少或防止摩擦和磨损）。

Normally, under normal load, proper lubrication and lubrication, Nanjing SKF bearings can operate between minus 30 and 150 degrees Celsius (effect: reduce or prevent friction and wear).

文章来自：南京SKF轴承 www.wh-skf.com

The article is from: Nanjing SKF bearing www.wh-skf.com

文章来自：南京INA轴承 www.ina-china.cn

The article is from: Nanjing INA bearing www.ina-china.cn

文章来自：南京NSK轴承 www.klbbearings.com

The article is from: Nanjing NSK bearing www.klbbearings.com

***：524085168  

电话：0510-81207777

手机：13311666672