南京NSK轴承16014缺陷的不同表现形式

当南京NSK轴承在高速或低水平旋转时，当使用一段时间时会产生一些结果。这些缺点的罕见表现是什么？他们是怎么得到的？

When Nanjing NSK bearings are rotating at high speed or low level, some results will occur when they are used for a period of time. What are the rare manifestati*** of these shortcomings? How did they get it?

1。规则噪声的产生。

1. The generation of regular noise.

有时南京NSK轴承承在运行时有一个规则的声音，我们通常把它变成一个规则的声音。原因是多方面的。

Sometimes Nanjing NSK bearings h***e a regular sound during operation, and we usually turn it into a regular sound. The reas*** are manifold.

1。轴承滚道表面存在***，如颗粒物和油污，在轴承表面产生局部应力，造成磨损和噪声。因此，我们需要做好轴承的清洁和润滑。

1. There are foreign bodies on the surface of the bearing raceway, such as particulate matter and oil stain, which produce local stress on the surface of the bearing, causing wear and noise. Therefore, we need to do well in cleaning and lubrication of bearings.

2。零件如滚道和金属剥落。解决这一问题的方法是及时更换轴承。

2. Parts such as raceway and metal spalling. The way to solve this problem is to replace bearings in time.

二。南京NSK轴承异常温度

Two. Abnormal temperature of NSK bearing in Nanjing

1。润滑油使用不当。过多或过少的润滑剂会增加轴承接触表面的摩擦热，从而导致工作温度的异常升高。因此，应合理使用润滑剂。

1. Improper use of lubricating oil. Too much or too little lubricant will increase the friction heat of the bearing contact surface, which will lead to the abnormal increase of the working temperature. Therefore, lubricants should be used rationally.

2、轴承间隙过小或密封不当会引起温升。在这方面，除了调整承载能力外，还需要暂停其密封形状的改进。

2, too ***all bearing clearance or improper sealing will cause temperature rise. In this regard, in addition to adjusting the carrying capacity, it is also necessary to suspend the improvement of its seal shape.

三。***中有强烈的金属声。

Three. There was a strong metallic sound in the operation.

除了南京NSK轴承规则的噪声和不规则的噪声之外，还存在金属应力的发生。这一结果的原因包括：

Besides the noise and irregular noise of Nanjing NSK bearing rules, there is also the occurrence of metal stress. The reas*** for this result include:

1，南京NSK轴承组件装配水平差。在轴承零件加工精度高的前提下，要求装配质量和装配质量。解决这一问题的方法是提高轴承零件的装配水平和装配水平。

1, the assembly level of Nanjing NSK bearing components is poor. Under the premise of high machining accuracy of bearing parts, assembly quality and assembly quality are required. The way to solve this problem is to improve the assembly level and assembly level of bearing parts.

2，异常长期负荷下的义务。因此，有必要选择合适的间隙尺寸并施加过大的预紧力。

2, obligati*** under abnormal long-term load. Therefore, it is necessary to choose the appropriate gap size and apply excessive preload.

文章来自：南京SKF轴承 www.wh-skf.com

The article is from: Nanjing SKF bearing www.wh-skf.com

文章来自：南京INA轴承 www.ina-china.cn

The article is from: Nanjing INA bearing www.ina-china.cn

文章来自：南京NSK轴承 www.klbbearings.com

The article is from: Nanjing NSK bearing www.klbbearings.com

***：524085168  

电话：0510-81207777

手机：13311666672