南京NSK轴承61805振动器的固定操作手法

振动器南京NSK轴承可能损坏振动器轴承的内部部件，可能污染轴承或重新安装轴承。因此，振动筛轴承的拆卸必须非常小心，轴必须得到适当的支撑，否则拆卸力可能损坏轴承。为此，上海轴承专用振动筛轴承轴承的一些注意事项。

Vibrator Nanjing NSK bearings may damage the internal parts of the vibrator bearings, may pollute the bearings or reinstall the bearings. Therefore, the demolition of the shaker bearing must be very careful, the shaft must be properly supported, otherwise the demolition force may damage the bearing. To this end, Shanghai bearing special vibration sieve bearing bearing some matters needing attention.

这些孔通常由***的南京NSK轴承，如盲塞、振动筛圆锥滚子轴承、壳体上的几个凹口、肩部、垫圈和压力机去除。去除或照亮。

These holes are usually removed by independent Nanjing NSK bearings such as blind plugs, vibrating screen tapered roller bearings, several notches on the housing, shoulders, washers and presses. Remove or illuminate.

内圈容易通过机械拉拔去除。在这方面，我们必须注意内圈的张力。

The inner ring is easily removed by mechanical drawing. In this regard, we must pay attention to the tension of the inner ring.

大型振动筛内圈采用液压操作。轴上的油孔是油压的，容易拔出。轴承宽度，油压拉，使用，拆卸和卸载操作。

The inner ring of large vibrating screen is operated hydraulically. The oil holes on the shaft are oil pressure and easy to pull out. Bearing width, oil pressure pull, use, di***antling and unloading operation.

NU和NJ圆柱滚子南京NSK轴承的轴承环可以用来去除感应加热。局部区域在短时间内局部加热以扩大内环。

NU and NJ cylindrical roller bearings in Nanjing NSK bearing rings can be used to remove induction heating. The local area is heated locally in a short time to expand the inner ring.

拆下较小的套筒，将支撑块紧固到内圈上的轴上，轻轻拧紧螺母后面的螺母，然后用锤子将其卸下。

Remove the ***aller sleeve, fasten the support block to the shaft on the inner ring, gently tighten the nut behind the nut, and then remove it with a hammer.

伸缩套筒以与适配器套筒相同的方式夹紧。但伸缩套管由于其特殊的螺母而易于操作。适用于较大径向载荷和较小轴向载荷的双列球面轴承固定在光轴上。

The telescopic sleeve is clamped in the same way as the adapter sleeve. But the telescopic casing is easy to operate because of its special nut. Double row spherical bearings suitable for larger radial loads and ***aller axial loads are fixed on the optical axis.

南京NSK轴承内圈由肩部和锁紧螺母固定固定。它能承受非常少的双向轴向载荷。轴向结构尺寸较小。

Nanjing NSK bearing inner ring is fixed and fixed by shoulder and lock nut. It can withstand very few bidirectional axial loads. The axial structure size is ***all.

轴承内圈由肩部和干涉件固定。适用于固定支撑结构的两端。结构简单，体积小。

The inner ring of the bearing is fixed by shoulder and interference parts. It is suitable for both ends of the fixed supporting structure. The structure is simple and the volume is ***all.

轴承内圈由轴肩和南京NSK轴承轴端环轴向固定。轴端环与轴端螺纹连接。应松开固定螺钉。适用于螺纹端不螺纹或空间有限的场合。

The inner ring of the bearing is axially fixed by the shaft shoulder and the NSK bearing shaft end ring of Nanjing. The shaft end ring is threaded with the shaft end. The retaining screws should be loosened. It is suitable for occasi*** where thread ends are not thread or space is limited.

轴承内圈的轴向固定是通过压缩轴上的紧固套筒的内径的径向尺寸来实现的。

The axial fixation of the bearing inner ring is achieved by compressing the radial dimension of the inner diameter of the fastening sleeve on the shaft.

轴承的内圈由肩部和锁紧螺母固定。锁紧垫圈锁紧安全可靠，适用于高速重载场合。

The inner ring of the bearing is fixed by the shoulder and the locking nut. Lock washer locking is safe and reliable, suitable for high speed and he***y load occasi***.

文章来自：南京SKF轴承 www.wh-skf.com

The article is from: Nanjing SKF bearing www.wh-skf.com

文章来自：南京INA轴承 www.ina-china.cn

The article is from: Nanjing INA bearing www.ina-china.cn

文章来自：南京NSK轴承 www.klbbearings.com

The article is from: Nanjing NSK bearing www.klbbearings.com

***：524085168  

电话：0510-81207777

手机：13311666672