耐水泥环境下南京INA轴承轮毂系列的热处理

南京INA轴承用于拖拉机变速箱、车轮、发动机和其他部件。具有耐泥浆热处理技术的轴承可用于泥浆和重载条件下。

Nanjing INA bearings are used for tractor gearboxes, wheels, engines and other components. Bearings with mud resistant heat treatment technology can be used in slurry and he***y load conditi***.

当汽车轮毂南京INA轴承损坏时，底盘轮的相应位置产生连续的摩擦和碰撞声，即“咔哒咔哒”声。

When the Nanjing INA bearing of the automobile hub is damaged, the corresponding position of the chassis wheel produces continuous friction and collision sound, namely "click click click".

拖拉机是安装在车体前后的各种作业机械，可用于农田牵引机械、播种、施肥、喷洒等。

Tractors are all kinds of operating machinery installed before and after the car body, which can be used for farmland traction machinery, seeding, fertilization, spraying and so on.

一旦轴承具有明显的阻力和摩擦，螺母慢慢松动，直到一个新的开口销插入***近的开口销孔。

Once the bearing has ***ious resistance and friction, the nut slowly loosens until a new opening pin is inserted into the nearest opening pin hole.

在任何情况下，南京INA轴承螺母不应旋转以松开1/4的环，否则会导致轮毂轴承松动，导致早期磨损。插入销后，应移动和弯曲端部，防***落。

In any case, the Nanjing INA bearing nut should not be rotated to loosen 1/4 of the ring, otherwise it will cause hub bearing loosening, leading to early wear. After inserting pins, the ends should be moved and bent to prevent falling off.

此外，欧美等农业机械的使用也逐渐发展到规模化、南京INA轴承化的条件越来越苛刻。

In addition, the use of agricultural machinery such as Europe and the United States has gradually developed to large-scale, Nanjing INA bearings increasingly harsh conditi***.

为了满足这些要求，我们采用特殊材料密封轴承，采用特殊材料热处理工艺和高纯南京INA轴承，开发了世界***的设计技术、材料技术、摩擦学技术和制造技术。其他产品达到了***的寿命和对外界物体的抵抗性。对。

In order to meet these requirements, we h***e developed the world's leading design, material, tribology and manufacturing technologies by using special material seal bearings, special material heat treatment process and high purity Nanjing INA bearings. Other products h***e reached unprecedented life expectancy and resistance to external objects. Yes.

***后，将防尘盖扣回到制动鼓上，并安装返回轮。保持车轮两侧，并摇动它允许一个小间隙。

Finally, the dust cover is ***led back to the brake drum and the return wheel is installed. Keep the wheels on both sides and shake it to allow a ***all clearance.

如果轮毂南京INA轴承严重损坏，必须更换裂纹、点蚀或烧蚀。在安装新轴承之前，润滑它们并顺序组装它们。轴承的更换必须是灵活的，没有杂乱和振动。

If the hub of Nanjing INA bearing is seriously damaged, cracks, pitting or ablation must be replaced. Before installing the new bearings, lubricate them and assemble them sequentially. The replacement of bearings must be flexible, free from clutter and vibration.

文章来自：南京SKF轴承 www.wh-skf.com

The article is from: Nanjing SKF bearing www.wh-skf.com

文章来自：南京INA轴承 www.ina-china.cn

The article is from: Nanjing INA bearing www.ina-china.cn

文章来自：南京NSK轴承 www.klbbearings.com

The article is from: Nanjing NSK bearing www.klbbearings.com

***：524085168  

电话：0510-81207777

手机：13311666672