扬州NSK轴承温度的检查稳定性通过

扬州NSK轴承的温度可以通过轴承外部的温度来预测。如果油孔能够直接测量外圈的温度，则更为合适。

The temperature of NSK bearing in Yangzhou can be predicted by the temperature outside the bearing. If the oil hole can directly measure the temperature of the outer ring, it is more appropriate.

通常，轴承的温度随着轴承的开始而增加，在1-2小时后达到稳定状态。轴承的正常温度不同于机器的热容、散热、速度和负载。如果光滑部分合适，扬州NSK轴承温度将迅速上升，这将显示异常高温。此时，必须停止***，并采取必要的预防措施。

Normally, the temperature of the bearing increases with the start of the bearing, and reaches a steady state after 1-2 hours. The normal temperature of the bearing is different from the heat capacity, heat dissipation, speed and load of the machine. If the ***ooth part is suitable, the bearing temperature of Yangzhou NSK will rise rapidly, which will show abnormal high temperature. At this point, surgery must be stopped and necessary precauti*** should be taken.

热传感器可随时监测轴承的工作温度，当温度超过正常值时自动报警或停止。

The thermal sensor can monitor the working temperature of the bearing at any time, and automatically alarm or stop when the temperature exceeds the normal value.

业内***指出，如果高温经常表明扬州NSK轴承处于异常状态。高温也会损坏轴承的光滑剂。有时轴承的过热可以归因于轴承的平滑剂。如果轴承温度超过125度，长期转移将降低轴承寿命。

Industry experts pointed out that if the high temperature often indicates that Yangzhou NSK bearing is in an abnormal state. High temperature can also damage the ***ooth agent of the bearing. Sometimes the overheat of the bearing can be attributed to the ***oothing agent of the bearing. If the bearing temperature exceeds 125 degrees, the long term transfer will reduce the bearing life.

高温扬州NSK轴承的原因是光滑、光滑、光滑。它含有杂质、过载、轴承损耗环、间隙不足和油封引起的高摩擦。

The reason for high temperature Yangzhou NSK bearings is ***ooth, ***ooth and ***ooth. It contains impurities, overload, bearing loss ring, insufficient clearance and high friction caused by oil seal.

因此，需要在不测量轴承本身或其它重要部件的情况下连续监测轴承温度。如果操作条件是恒定的，温度的任何变化都可以表明它已经受到攻击。

Therefore, it is necessary to continuously monitor the bearing temperature without measuring the bearing itself or other important parts. If the operating conditi*** are c***tant, any change in temperature can indicate that it has been attacked.

轴承温度的周期性测量可应用于NSK数字温度计等温度计，它能***测量轴承温度并在单位温度或华氏温度下显示轴承温度。

The periodic measurement of the bearing temperature can be applied to a thermometer, such as the NSK digital thermometer, which can accurately measure the bearing temperature and display the bearing temperature at the unit temperature or Fahrenheit temperature.

滚动轴承的修复条件良好。应根据扬州NSK轴承损坏的规律和特点进行判断。***常用的中小型轴承通常因疲劳和环或滚子的过度磨损而损坏。当轴承滚动面进入第三磨损阶段或发生点蚀时，轴承迅速失效，滚道表面严重损坏。修理或丢失修理的价值是困难的。

The repairing condition of the rolling bearing is good. It should be judged according to the law and characteristics of NSK bearing damage in Yangzhou. The most commonly used ***all and medium bearings are usually damaged by fatigue and excessive wear of rings or rollers. When the rolling surface of the bearing enters the third wear stage or pitting corrosion, the bearing is rapidly failed and the raceway surface is seriously damaged. It is difficult to repair or lose the value of repair.

在上述阶段之前，扬州NSK轴承在滚子外表面上的深度仅为几微米到几十微米，这更为微妙和疲劳。因此，在这样的机会下，轴承将得到修复，并且可以以非常小的成本获得更好的修复效果。综上所述，滚动轴承的修复周期在轴承中得到了广泛的应用，***适合于修复损坏的电路。

Before the above stage, the depth of Yangzhou NSK bearings on the outer surface of the roller is only a few micr*** to tens of micr***, which is more subtle and fatigue. Therefore, under such an opportunity, the bearing will be repaired, and a better repair effect can be obtained at a very ***all cost. To sum up, the repair period of rolling bearings has been widely used in bearings, and is most suitable for repairing damaged circuits.

文章来自：扬州SKF轴承 www.wh-skf.com

The article comes from: Yangzhou SKF bearing www.wh-skf.com

文章来自：扬州INA轴承 www.ina-china.cn

The article comes from: Yangzhou INA bearing www.ina-china.cn

文章来自：扬州NSK轴承 www.klbbearings.com

The article comes from: Yangzhou NSK bearing www.klbbearings.com

***：524085168  

电话：0510-81207777

手机：13311666672