江苏SKF轴承卵石粉碎的润滑要求

在工业领域，卵石破碎机常用于建筑、冶金、矿山等行业。轴承零件是机械零件的关键零件之一，也是***易损坏的零件之一。为了保证江苏SKF轴承的正常运行，必须进行润滑。为此，润滑剂的使用应具有以下特点。

In the industrial field, pebble crusher is often used in c***truction, metallurgy, mining and other industries. Bearing parts are one of the key parts of mechanical parts and one of the most easily damaged parts. In order to ensure the normal operation of SKF bearings in Jiangsu, lubrication must be carried out. To this end, the use of lubricants should h***e the following characteristics.

1，高运行稳定性

1, high operating stability

当润滑脂处于正常工作状态时，轴承表面之间的润滑膜厚度应适当。此外，它通过轴承座的作用进入轴承进行润滑。一旦润滑脂的运行稳定性不高，在江苏SKF轴承的旋转运动中会发生润滑膜失效，从而轴承的润滑状态异常。

When the grease is in normal working condition, the thickness of the lubricating film between the bearing surfaces should be appropriate. Besides, it enters the bearing to lubricate through the function of the bearing seat. Once the running stability of the grease is not high, the lubrication film failure will occur in the rotational motion of the SKF bearing in Jiangsu, so that the lubrication state of the bearing is abnormal.

2，防锈

2, antirust

除了江苏SKF轴承润滑剂之外，润滑剂也应该具有防锈性能。因此，可以在轴承的表面上形成保护层，以防止水分和其他物质与金属表面发生反应。同时，为了降低油膜形成的难度，要求润滑剂具有优异的金属附着力。

Besides Jiangsu SKF bearing lubricants, lubricants should also h***e anti rust properties. Therefore, a protective layer can be formed on the surface of the bearing to prevent moisture and other substances from reacting with the metal surface. At the same time, in order to reduce the difficulty of oil film formation, lubricant is required to h***e excellent metal adhesion.

3，润滑剂的油封工作

3, oil seal work of lubricants

江苏SKF轴承润滑剂是油封的原因是它们可以有效地避免诸如灰尘之类的润滑剂等外来物质的污染。保护层的存在为润滑剂的操作提供了天然屏障。

The reason why Jiangsu SKF bearing lubricants are oil seals is that they can effectively ***oid contamination of foreign substances such as dust and other lubricants. The existence of the protective layer provides a natural barrier for the operation of lubricants.

4，润滑剂的正确选用

4, the correct selection of lubricants

即使在使用江苏SKF轴承润滑剂的注意事项中，所选择的润滑剂是不正确的，而且轴承的润滑也是***的。出于这个原因，需要仔细考虑粘度和其他参数。

Even in matters needing attention in the use of Jiangsu SKF bearing lubricants, the lubricant chosen is incorrect and the lubrication of the bearing is also harmful. For this reason, viscosity and other parameters need to be carefully c***idered.

5，润滑剂的非混合使用

5, non - mixed use of lubricants

不同润滑剂的粘度和组成不同。因此，禁止混合不同类型的润滑剂，特别是不相容的润滑剂。一旦混合，容易造成润滑油泄漏和轴承磨损。当新的润滑剂注入江苏SKF轴承时，轴承中的旧润滑剂应在注入新润滑剂之前进行清洗。

The viscosity and composition of different lubricants are different. Therefore, it is forbidden to mix different types of lubricants, especially incompatible lubricants. Once mixed, it is easy to cause lubricating oil leakage and bearing wear. When the new lubricant is injected into Jiangsu SKF bearings, the old lubricants in the bearings should be cleaned before injection of new lubricants.

文章来自：江苏SKF轴承 www.wh-skf.com

文章来自：江苏INA轴承 www.ina-china.cn

文章来自：江苏NSK轴承 www.klbbearings.com