江苏INA轴承防锈工作的进一步开展

江苏INA轴承的腐蚀直接影响轴承和整个机械设备的使用。为了加强轴承的防锈工作，应注意以下事项：

The corrosion of INA bearings in Jiangsu has a direct bearing on the use of bearings and the entire mechanical equipment. In order to strengthen the rust prevention work of bearings, we should pay attention to the following matters:

1，必须严格选择防锈材料检验材料的质量。经过大量的防锈材料测试，合格的防锈材料可大量使用。如果轴承工作环境中存在水分或需要与液体接触，则应进一步加强强轴承的抗锈性。

1, we must strictly select the quality of inspection materials for antirust materials. After a large number of rust proof materials testing, qualified rust preventive materials can be used in large quantities. If there is moisture in the working environment of the bearing or need to contact with the liquid, the rust resistance of the strong bearing should be further strengthened.

2，在轴承生产过程中，应加强轴承的防锈技术。在生产过程中，使用冷却水将起到一定的防锈作用。江苏INA轴承冷却水主要由合成磨削液和苏打水组成。一旦冷却水被误用，就会导致轴承的腐蚀和***。

2, in the bearing production process, we should strengthen the anti rust technology of bearings. In the production process, the use of cooling water will play a certain role in anti rust. Jiangsu INA bearing cooling water is mainly composed of synthetic grinding fluid and soda water. Once the cooling water is misused, it will cause corrosion and burn of bearings.

3，加强对防锈工人的管理，要求定期管理防锈液、防锈油和冷却水等与江苏INA轴承锈蚀有关的问题，检查轴承的清洁度、油污等。防锈剂质量的提高直接关系到轴承防锈工作的质量。

3, strengthen the management of anti rust workers, require regular management of rust proof liquid, rust proof oil and cooling water and other problems related to the corrosion of Jiangsu INA bearing, and check the cleanliness and oil pollution of the bearing. The improvement of the quality of the rust inhibitor is directly related to the quality of the rust prevention work of the bearing.

4、江苏INA轴承清洗与防锈关系：定期清洗轴承，可有效减少轴承的腐蚀。在江苏INA轴承的清洗中，应使用清洁***，如清洗液用于清洗。清洗后，用干净抹布擦拭，涂上薄薄的油。当清洗大量轴承时，可以使用热油。所谓热油清洗是将轴承置于发动机油90-100度，并溶解内部腐蚀。

4, Jiangsu INA bearing cleaning and rust prevention relati***hip: regular cleaning of bearings, can effectively reduce the corrosion of bearings. In the cleaning of INA bearings in Jiangsu, clean gasoline should be used, such as cleaning fluid for cleaning. After cleaning, wipe with a clean cloth and apply thin oil. When a large number of bearings are cleaned, hot oil can be used. The so-called hot oil cleaning is to place bearings in engine oil 90-100 degrees and to dissolve internal corrosion.

因此，轴承的防锈不仅要注意江苏INA轴承在生产中的选择和防锈技术，还要加强在使用中的防锈工作。

Therefore, bearing rust prevention should not only pay attention to the choice and rust prevention technology of Jiangsu INA bearing in production, but also strengthen the rust prevention work in use.

文章来自：江苏SKF轴承 www.wh-skf.com

文章来自：江苏INA轴承 www.ina-china.cn

文章来自：江苏NSK轴承 www.klbbearings.com