江苏SKF轴承尘埃影响与振纹误差

旋转江苏SKF轴承齿轮是一个精密零件，其使用必须相应地进行。无论采用何种轴承，性能都不理想，无法达到预期的高性能。应重视进口轴承的使用。

The rotating Jiangsu SKF bearing gear is a precision part, and its use must be carried out accordingly. No matter what bearings are used, the performance is not ideal and can not achieve the expected high performance. The use of imported bearings should be paid attention to.

（1）保持江苏SKF轴承及其周围环境的清洁。即使是看不见的灰尘也会对进口轴承产生不良影响。因此，保持周围的清洁，使灰尘不会***进口轴承。

(1) keep the SKF bearing and its surrounding environment clean in Jiangsu. Even invisible dust can h***e an adverse effect on imported bearings. Therefore, keep the surrounding clean so that the dust will not invade the imported bearings.

（2）谨慎使用。在使用过程中对轴承的强烈影响将导致***和压痕，并成为事故的原因。在严重的情况下，江苏SKF轴承会***和断裂，所以我们必须注意它。

(2) prudent use. The strong impact on bearing during use will lead to scar and indentation, and become the cause of the accident. In serious cases, Jiangsu SKF bearing will rupture and break, so we must pay attention to it.

（3）使用适当的操作工具。避免用适当的工具替换现有工具。

(3) use the appropriate operating tools. ***oid replacing existing tools with appropriate tools.

（4）江苏SKF轴承的腐蚀应引起重视。当进口轴承运行时，手上的汗水会成为锈蚀的原因。注意使用干净的手，***好戴手套。

(4) the corrosion of the SKF bearing in Jiangsu should be paid attention to. When the imported bearings are running, the sweat on the hands will become the cause of rust. Pay attention to the use of clean hands, it is best to wear gloves.

虽然这种噪声主要是由制造误差引起的，但它仍然与润滑油的选择、轴承的安装条件、江苏SKF轴承的轴线和轴承座的状态有关。噪声分为笼型和振动型两种类型。

Although this noise is mainly caused by manufacturing errors, it is still related to the selection of the lubricating oil, the installation conditi*** of the bearing, the axis of the SKF bearing in Jiangsu and the state of the bearing seat. The noise is divided into two types: cage type and vibration type.

（1）保持架的声音及其控制方法是振动和保持器的冲击引起的周期性振动和噪声，当袋孔松动、摩擦大时容易出现。这种江苏SKF轴承噪声主要发生在滚珠轴承和圆锥滚子轴承上。

(1) the sound of the cage and its control method are the periodic vibration and noise caused by the shock of the vibration and the maintainer, and it is easy to appear when the bag hole is loose and the friction is large. This kind of Jiangsu SKF bearing noise mainly occurs on ball bearings and tapered roller bearings.

当发生江苏SKF轴承油润滑或油润滑时，会发生冲头保持架和固体保持架，但当润滑不良或润滑剂耗尽时，径向间隙较大，外圈承受。扭矩负荷大，保持架结构不好，精度不高。

When the Jiangsu SKF bearing oil is lubricated or oil lubricated, the punch holder and the solid cage will occur, but when the lubrication is bad or the lubricant is exhausted, the radial clearance is larger and the outer ring bears. The torque load is large, the cage structure is not good, and the accuracy is not high.

当江苏SKF轴承保持架或铆钉头突然断裂以控制保持架的噪声和振动时，更容易发生，具有良好的润滑剂以减少轴承的安装误差、轴承的径向间隙或适当的轴向预紧力，以及选择。合理合理的笼子。轴承或实心保持架，无磨损轴承。

When the Jiangsu SKF bearing cage or rivet head is suddenly broken to control the noise and vibration of the cage, it is easier to occur, with good lubricants to reduce the installation error of the bearing, the radial clearance of the bearing or the appropriate axial pretension, and the selection. A reasonable and reasonable cage. Bearing or solid cage, no wear bearing.

（2）江苏SKF轴承振动模态噪声及其控制方法直接关系到轴承滚动表面的波纹度。这是一种纯音噪声。对于恒定速度，它的频率是恒定的，其频率随速度变化。

(2) the vibration modal noise of SKF bearing in Jiangsu and its control method are directly related to the w***iness of the rolling surface of the bearing. This is a kind of pure tone noise. For c***tant speed, its frequency is c***tant, and its frequency varies with speed.

文章来自：江苏SKF轴承 www.wh-skf.com

文章来自：江苏INA轴承 www.ina-china.cn

文章来自：江苏NSK轴承 www.klbbearings.com